DIY kit: 65 gal

DIY kit: 65 gal

$84.98

Build your own Rain Bench® that holds 65 gallons of water, and 2 people.

(the water in, the people on)

The actual capacity of the liner that is included is up to 140 gallons, which means if you simply build a bigger box, it will expand to the size (maximum 32″L x 32″W x32″h) and hold a ton of water.

Ok, it will only hold 1,120 lbs, or a little over half ton of water if built to max capacity.

That’s a lot of water. (Tip: If you want to put one on your deck, make sure it was built to hold a hot tub. We recommend setting it on a level bed of permeable gravel instead)

Description

RainBench DIY kitThe Original Rain Bench® DIY kit, this one allows you to take one sheet of plywood, a few sticks of lumber and turn it into a nice little bench that you can paint any color you like, store water in and sit down on.

Save Water, Just by Sitting There.

The RainBench® DIY Kit is a rainwater harvesting system for someone with basic carpentry skills.  Save $ on shipping.  You supply the lumber and labor to build a bench that acts like a rain barrel with 65 gallon capacity. Buy lumber & hardware locally (usually ~30-40)

Detailed instructions in this kit help you build a 36″L x 21″H x 28″W bench that holds 65 gallons of rainwater or greywater.  (liner can be customized to hold up to 140 gallons)

PLEASE NOTE:  The brass fitting (pictured above) and one of the others have been replaced with a more efficient direct garden hose adapter.  Works the same.

Rain Bench® DIY Kit includes:

1) Illustrated instructions to build your Rain Bench
1) Custom fitted 2-ply waterproof liner, 32″x32″x32″
2) Mosquito resistant PVC fittings welded to liner
1) 1′ UV-resistant tubing, 1″ I.D. (as two 6″ sections)
2) Reducers, 2″x1″ PVC thread
1) 1″ thread to barb (insert)
1) 1″ Tee thread to barb
1) 1″ barb to 3/4″ hose adapter
1) Garden Hose shut-off valve
1) Roll Teflon thread tape, 260″

**MADE IN THE USA**

Materials purchased separately:

  • 1 – 4’x8′ – 1/2″ exterior grade plywood (treated is best)  **Many lumber or home improvement stores will make all the cuts for little extra, or free!!**
  • 4 – 2×2 – 8′ lumber (actual size 1 1/2″ x 1 1/2″)65g_RainBench
  • Fasteners:  40 – 1 5/8″ deck screws,   8 – 2″ deck screws
  • Small can of sealer/ paint

Tools needed:

  • Saw or router
  • Drill/ screwdriver
  • Straight edge or chalk line
  • Tape measure, pencil

To the right is what it will look like if you follow the included instructions (remember, lumber is not included in this kit, but a shopping list is for exactly what you can easily buy locally)

Here is a video of Scott (aka the flash) throwing together a DIY kit:

Additional information

Weight 4 lbs
Dimensions 6 × 9 × 12 in

Reviews

There are no reviews yet.

Be the first to review “DIY kit: 65 gal”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.